4 Ddr3 Slots
2021年10月11日Register here: http://gg.gg/w6qcl
A motherboard with DDR4 slots cannot use DDR3, and you can’t put DDR4 into a DDR3 slot. But let’s dig into the differences a bit more. Read more: Intel Core i9-9900K is the new champion of the. BTW your board supports dual channel only in 2-4 and 1-2-3-4 slots according to the manual. With different sticks, like that 8GB and 4GB you’ve tried, dual-channel won’t work. If the above manipulations did not help, try setting the memory to DDR3-1333 or lower and set the timings and voltage according to its SPD spec.The answer, unfortunately is not definitive. Usually, yes. But, because of no strict standardization enforcement it may not work. I’d say better to order DDR3 if that is what originally came with your motherboard.More info below.From: www.tomshardware.com/ans…
DDR3L modules are backwards compatible with DDR3 by design.4 Ddr3 Slots Game
Manufacturers use the same integrated circuits for DDR3 and DDR3L. The highest quality ICs are tested for operating at 1.35 volts and are branded as DDR3L if they run properly. Other than that, there’s no difference between them.Hello,4 Ddr3 Slots Vs4 Ddr3 Slots App
yes it is correct, that they should use the same Chips. So from a functionallity point of view it is really just the same compatibility issue as with DDR3 from one vendor to another vendor (or even just for one die shrink to the next die shrink).
JEDEC defines that the DIMM needs to be backward compatible. So if a JEDEC compliant DIMM is operating at 1.5V should be tested and verified from the vendor. But not too many DIMM vendors really state that the DIMM is JEDEC compliant.
E. g. I have seen DIMMs with devices not supporting specific CL that they would need to support to be JEDEC compliant .
And in this case thre is no need that the DIMM really is backward compatible (even if it is just a question of Speed, or reliability over time).
Even standard DIMMs are theoretically interchangable, there are many compatibility issues between motherboard, controller and DIMM out there . and DDR3L will not make it better .
Guess thats the usual difference between theory and praxis .
and so I prefer to look at the DIMM spec and at least verify that the 1.5V is a supported voltage on a DDR3L DIMM if I intend to use it in a DDR3 System…Placa Mae Ddr3 4 Slots
Hermann
Register here: http://gg.gg/w6qcl
https://diarynote-jp.indered.space
A motherboard with DDR4 slots cannot use DDR3, and you can’t put DDR4 into a DDR3 slot. But let’s dig into the differences a bit more. Read more: Intel Core i9-9900K is the new champion of the. BTW your board supports dual channel only in 2-4 and 1-2-3-4 slots according to the manual. With different sticks, like that 8GB and 4GB you’ve tried, dual-channel won’t work. If the above manipulations did not help, try setting the memory to DDR3-1333 or lower and set the timings and voltage according to its SPD spec.The answer, unfortunately is not definitive. Usually, yes. But, because of no strict standardization enforcement it may not work. I’d say better to order DDR3 if that is what originally came with your motherboard.More info below.From: www.tomshardware.com/ans…
DDR3L modules are backwards compatible with DDR3 by design.4 Ddr3 Slots Game
Manufacturers use the same integrated circuits for DDR3 and DDR3L. The highest quality ICs are tested for operating at 1.35 volts and are branded as DDR3L if they run properly. Other than that, there’s no difference between them.Hello,4 Ddr3 Slots Vs4 Ddr3 Slots App
yes it is correct, that they should use the same Chips. So from a functionallity point of view it is really just the same compatibility issue as with DDR3 from one vendor to another vendor (or even just for one die shrink to the next die shrink).
JEDEC defines that the DIMM needs to be backward compatible. So if a JEDEC compliant DIMM is operating at 1.5V should be tested and verified from the vendor. But not too many DIMM vendors really state that the DIMM is JEDEC compliant.
E. g. I have seen DIMMs with devices not supporting specific CL that they would need to support to be JEDEC compliant .
And in this case thre is no need that the DIMM really is backward compatible (even if it is just a question of Speed, or reliability over time).
Even standard DIMMs are theoretically interchangable, there are many compatibility issues between motherboard, controller and DIMM out there . and DDR3L will not make it better .
Guess thats the usual difference between theory and praxis .
and so I prefer to look at the DIMM spec and at least verify that the 1.5V is a supported voltage on a DDR3L DIMM if I intend to use it in a DDR3 System…Placa Mae Ddr3 4 Slots
Hermann
Register here: http://gg.gg/w6qcl
https://diarynote-jp.indered.space
コメント